2006 OUTLANDER 800
Engine Ice ATV/UTV Coolant + Antifreeze 1.89L
Engine Ice is a high performance power sports engine coolant + antifreeze that reduces operating temperatures. This coolant is biodegradable, ready to use but not recommended to be mixed with other coolants.
Ready-To-Use
Boil-over protection to 125 C or 256F
Freeze protection to -33C or -28F
** UNIVERSAL FIT **
-
$45.95$41.35Add to cart
EPI Secondary Clutch Spring Red (Can-Am)
EPI’s red spring is a upgrade from the Can-Am OEM secondary clutch springs.
- 155lb @ 2.9″ load
- 215lbs @ 1.9″ load
Fitment:
- 2006-2022 Outlander 650, All models
- 2006-2015 Outlander 800, All models
- 2016-2022 Outlander 850, All models
- 2012-2022 Outlander 1000, All models
- 2007-2015 Renegade 800
- 2016-2021 Renegade 850
- 2012-2021 Renegade 1000
EPI Wheel Bearing Ez Greaser Tool 30mm Bore
EPI wheel bearing EZ greaser made from billet aluminum.
Fits:
All Balls # 25-1516
EPI # WE301411
** Must remove axle to grease bearings.**
EXTREME ATV Aluminum Shifter Handle
Extreme ATV billet aluminum shifter handle, anodized black with machined logo.
Can-am fitment:
- 2006-2023 Outlander 500, 570, 650, 800, 850, 1000 – All Models
- 2007-2023 Renegade 500, 570, 800, 850, 1000 – All Models
- 2013-2018 Maverick 1000 – All Models
Kawasaki fitment:
- 2006-2022 Brute Force 750 – All Models
EXTREME ATV Domed Aluminium Gas Cap Can-Am ATV
Extreme ATV billet aluminum gas cap, anodized black with machined logo & o-ring to seal.
Fitment:
- 2006-2023 Outlander 500, 570, 650, 800, 850, 1000 – All Models
- 2007-2023 Renegade 500, 570, 800, 850, 1000 – All Models
EXTREME ATV G1,G2 Renegade & G1 Outlander
Extreme ATV seat cover with logos.
Fits:
08-15 Renegade 500
16-22 Renegade 570
07-15 Renegade 800
16-22 Renegade 850
12-22 Renegade 1000
07-12 Outlander 500
06-12 Outlander 650
06-11 Outlander 800
-
$129.95Add to cart
FTP Steel Trail Footwell Set G1-OUT
FTP’s trail foot wells are a direct replacement for the factory plastic models. Cut & bent from 1/8″ steel & embossed with the FTP logo and shipped unpainted. Allow’s easier removal of the clutch cover and changing the engine & transmission oils.
Allows up to 31″ tire.
Fitment:
2007-12 Outlander 500 Xt, Xtp, Dps
2006-12 Outlander 650 Xt, Xtp, Dps
2006-11 Outlander 800 Xt, Xtp, Dps
-
$329.95Add to cart
GATES 30C3750 G-Force C12 Belt
Gates G-force C12 cvt belt utilizes carbon tensile cord for minimal stretch & extraordinary strength. High-performance neoprene with a trapezoidal topnotch and rounded bottom cog design maximizing heat control and flexibility. Carbon tensile cords are bonded to aramid fiber-loaded rubber with specially formulated adhesion gum resulting in increased side-load resistance, preventing belt distortion and edge cord pullout.
Fitment:
2007-2015 Outlander 500 All Models
2016-2023 Outlander 570 All Models
2006-2022 Outlander 650 All Models
2006-2015 Outlander 800 All Models
2016-2023 Outlander 850 All Models
2012-2023 Outlander 1000 All Models
2008-2015 Renegade 500 All Models
2016-2022 Renegade 570 All Models
2007-2015 Renegade 800 All Models
2016-2022 Renegade 850 All Models
2012-2023 Renegade 1000 All Models
-
$179.99$161.99Add to cart
GATES 30R3750 G-Force Redline Belt
Gates G-force Redline cvt belts have a patented Ethylene Elastomer compound that delivers a 75% greater dynamic axial stiffness, up to 50% lower speed losses & better recovery from temperatures up to +170C(+338F) without power loss. Unmatched Temperature Capability – Runs cooler, resists glazing for better recovery and reduced cracking/chunking out after running at temps exceeding +149°C (+300°F). Extended Belt Life – Belt life increased 100-300% versus aftermarket competitive belts in severe duty lab test conditions and in field testing. Higher Power Capacity – Reduced speed (rpm) loss by 50% under high loads and increased load capacity by >10% compared to other aftermarket belt.
Fitment:
2006-2015 Outlander 800 All Models
2016-2023 Outlander 850 All Models
2012-2023 Outlander 1000 All Models
2007-2015 Renegade 800 All Models
2016-2022 Renegade 850 All Models
2012-2023 Renegade 1000 All Models
2013-2018 Maverick All Models
2016-2018 Maverick Turbo
2011-2020 Commander 800 All Models
2013-2020 Commander 1000 All Models
-
$223.95$201.56Add to cart
KFI Winch Mount 100525
KFI winch mount 100525 for most 2,000lb to 3,500lb winches, 100% made in USA, powdercoated black, 3/16″ material, includes mounting hardware.
Models:
2007-2012 Outlander 500, MAX
2006-2012 Outlander 650, MAX
2006-2011 Outlander 800
2006-2012 Outlander 800MAX
2011-2012 Outlander 800XMR
Roller fairlead & winch not included
MOOSE Heated Clamp-On Grip Set Dual Zone
Moose dual zone clamp-on heated grips & thumb warmer by Heat Demon with ODI clamp-on grips. Fits most ATV’s & Snowmobiles with 7/8″ handlebars & a thumb throttle.
- One adhesive backed silicone thumb warmer
- Dual zone controller-select thumb and grip heat levels separately
- Five level power memory
- Grips use maximum 40 watts(20per grip) @ 14volts
- Thumb warmer use maximum 5 watts @ 14volts
** UNIVERSAL FIT **
-
$289.99$260.99Add to cart
MR. RPM ARP Head Stud Kit Can-Am
ARP head stud kit by MR. RPM. Stronger option to replace OEM studs when re-doing cylinder or upgrading to a bigger bore kit.
Fits all Can-Am v-twin Atv’s & SxS’s
650cc, 800cc & 850cc cylinders use 8pcs-head studs, nuts, washers & spacers
1000cc cylinders use 8pcs-head studs, nuts & washers
** Spacers only used on shorter 650, 800 & 850 cylinders **
-
$345.95Add to cart
MR. RPM Base Gasket Set .020″/Can-Am
MR. RPM replacement base gasket set for Can-Am v-twin engines.
Thickness: .020″
Fits all Can-Am v-twin Atv’s & SxS’s
500cc, 570cc, 650cc, 800cc, 850cc & 1000cc
MR. RPM cast aluminum valve cover & water neck set
MR. RPM cast aluminium valve covers & water necks. These sets are a direct replacement for the plastic Can-Am OEM models.
Includes:
2 – Valve covers, 8 – Valve cover bolts, 2- Water necks, 2- Bleeder bolts
Fitment:
All Can-Am 500, 570, 650, 800, 850 & 1000cc v-twin engines.
** Do not over tighten bolts & test fit before installation **
** Mild grinding may be required on the inside of the covers to clear some cams **
MR. RPM Head Gasket 91mm Bore 800/1000cc Can-Am
MR. RPM stock bore replacement head gasket.
Size: 91mm Bore
Fitment:
800cc & 1000cc Can-Am v-twin’s
** 2pcs required to re-do both cylinders **
MR. RPM Head Gasket 93mm Big Bore
MR. RPM big bore replacement head gasket.
Size: 93mm
Fitment:
800cc Can-Am v-twins bored to 840cc or 93mm
1000cc Can-Am v-twins bored to 1018cc or 93mm
** 2pcs required to re-do both cylinders **