2008 OUTLANDER 500 Max
EPI Wheel Bearing Ez Greaser Tool 30mm Bore
EPI wheel bearing EZ greaser made from billet aluminum.
Fits:
All Balls # 25-1516
EPI # WE301411
** Must remove axle to grease bearings.**
EXTREME ATV Aluminum Shifter Handle
Extreme ATV billet aluminum shifter handle, anodized black with machined logo.
Can-am fitment:
- 2006-2023 Outlander 500, 570, 650, 800, 850, 1000 – All Models
- 2007-2023 Renegade 500, 570, 800, 850, 1000 – All Models
- 2013-2018 Maverick 1000 – All Models
Kawasaki fitment:
- 2006-2022 Brute Force 750 – All Models
EXTREME ATV Domed Aluminium Gas Cap Can-Am ATV
Extreme ATV billet aluminum gas cap, anodized black with machined logo & o-ring to seal.
Fitment:
- 2006-2023 Outlander 500, 570, 650, 800, 850, 1000 – All Models
- 2007-2023 Renegade 500, 570, 800, 850, 1000 – All Models
GATES 30C3750 G-Force C12 Belt
Gates G-force C12 cvt belt utilizes carbon tensile cord for minimal stretch & extraordinary strength. High-performance neoprene with a trapezoidal topnotch and rounded bottom cog design maximizing heat control and flexibility. Carbon tensile cords are bonded to aramid fiber-loaded rubber with specially formulated adhesion gum resulting in increased side-load resistance, preventing belt distortion and edge cord pullout.
Fitment:
2007-2015 Outlander 500 All Models
2016-2023 Outlander 570 All Models
2006-2022 Outlander 650 All Models
2006-2015 Outlander 800 All Models
2016-2023 Outlander 850 All Models
2012-2023 Outlander 1000 All Models
2008-2015 Renegade 500 All Models
2016-2022 Renegade 570 All Models
2007-2015 Renegade 800 All Models
2016-2022 Renegade 850 All Models
2012-2023 Renegade 1000 All Models
-
$179.99$161.99Add to cart
KFI Winch Mount 100525
KFI winch mount 100525 for most 2,000lb to 3,500lb winches, 100% made in USA, powdercoated black, 3/16″ material, includes mounting hardware.
Models:
2007-2012 Outlander 500, MAX
2006-2012 Outlander 650, MAX
2006-2011 Outlander 800
2006-2012 Outlander 800MAX
2011-2012 Outlander 800XMR
Roller fairlead & winch not included
MOOSE Heated Clamp-On Grip Set Dual Zone
Moose dual zone clamp-on heated grips & thumb warmer by Heat Demon with ODI clamp-on grips. Fits most ATV’s & Snowmobiles with 7/8″ handlebars & a thumb throttle.
- One adhesive backed silicone thumb warmer
- Dual zone controller-select thumb and grip heat levels separately
- Five level power memory
- Grips use maximum 40 watts(20per grip) @ 14volts
- Thumb warmer use maximum 5 watts @ 14volts
** UNIVERSAL FIT **
-
$289.99$260.99Add to cart
MR. RPM Base Gasket Set .020″/Can-Am
MR. RPM replacement base gasket set for Can-Am v-twin engines.
Thickness: .020″
Fits all Can-Am v-twin Atv’s & SxS’s
500cc, 570cc, 650cc, 800cc, 850cc & 1000cc
MR. RPM cast aluminum valve cover & water neck set
MR. RPM cast aluminium valve covers & water necks. These sets are a direct replacement for the plastic Can-Am OEM models.
Includes:
2 – Valve covers, 8 – Valve cover bolts, 2- Water necks, 2- Bleeder bolts
Fitment:
All Can-Am 500, 570, 650, 800, 850 & 1000cc v-twin engines.
** Do not over tighten bolts & test fit before installation **
** Mild grinding may be required on the inside of the covers to clear some cams **
ODI Rogue Atv/Snow Lock-On Grips Black
ODI Rogue Lock-On grips feature large raised pads for better shock absorption and deep grooves to channel away dirt and debris. NEW V2 single lock-on clamp, easy no-hassle installation, 100% slip free performance, 125mm length, 3/4 flange and easy knock out ends for full-wrap hand guards.
Fits most ATV’s & Snowmobiles with 7/8″ handlebars & thumb throttles.
** UNIVERSAL FIT **
OMD Classic Gas Cap Can-Am Red
CNC machined 6061-T6 aluminum, Powder coated, Laser engraved logo, 3.95″ Diameter
** OVER TIGHTENG THE CAP MAY CAUSE LEAKAGE **
Fitment:
2006-23 Outlander 500, 570, 650, 800, 850 & 1000, All models
2007-23 Renegade 500, 570, 800, 850 & 1000, All models
2013-23 Ski-Doo, All models
OMD Classic Gas Cap Metallic Silver
CNC machined 6061-T6 aluminum, Powder coated, Laser engraved logo, 3.95″ Diameter
** OVER TIGHTENG THE CAP MAY CAUSE LEAKAGE **
Fitment:
2006-23 Outlander 500, 570, 650, 800, 850 & 1000, All models
2007-23 Renegade 500, 570, 800, 850 & 1000, All models
2013-23 Ski-Doo, All models
OMD Classic Gas Cap Satin Black
CNC machined 6061-T6 aluminum, Powder coated, Laser engraved logo, 3.95″ Diameter
** OVER TIGHTENG THE CAP MAY CAUSE LEAKAGE **
Fitment:
2006-23 Outlander 500, 570, 650, 800, 850 & 1000, All models
2007-23 Renegade 500, 570, 800, 850 & 1000, All models
2013-23 Ski-Doo, All models
OMD Classic Gas Cap Sunburst Yellow
CNC machined 6061-T6 aluminum, Powder coated, Laser engraved logo, 3.95″ Diameter
** OVER TIGHTENG THE CAP MAY CAUSE LEAKAGE **
Fitment:
2006-23 Outlander 500, 570, 650, 800, 850 & 1000, All models
2007-23 Renegade 500, 570, 800, 850 & 1000, All models
2013-23 Ski-Doo, All models
OMD Knuckle 1.0 Shifter Can-Am Red
CNC machined 6061-T6 aluminum, 5-1/4″ Tall, Powder coated, 8mm x 1.25 Threading
** MUST HAVE 2″ BAR RISERS FOR SHIFTER TO CLEAR BARS ***
Fitment:
2006-23 Outlander 500, 570, 650, 800, 850 & 1000, All models ( WILL NOT FIT 19+ XMR)
2007-23 Renegade 500, 570, 800, 850 & 1000, All models
2012-23 Brute Force 750
2012-23 King Quad 750
OMD Knuckle 1.0 Shifter Metallic Silver
CNC machined 6061-T6 aluminum, 5-1/4″ Tall, Powder coated, 8mm x 1.25 Threading
** MUST HAVE 2″ BAR RISERS FOR SHIFTER TO CLEAR BARS ***
Fitment:
2006-23 Outlander 500, 570, 650, 800, 850 & 1000, All models ( WILL NOT FIT 19+ XMR)
2007-23 Renegade 500, 570, 800, 850 & 1000, All models
2012-23 Brute Force 750
2012-23 King Quad 750
OMD Knuckle 1.0 Shifter Octane Blue
CNC machined 6061-T6 aluminum, 5-1/4″ Tall, Powder coated, 8mm x 1.25 Threading
** MUST HAVE 2″ BAR RISERS FOR SHIFTER TO CLEAR BARS ***
Fitment:
2006-23 Outlander 500, 570, 650, 800, 850 & 1000, All models ( WILL NOT FIT 19+ XMR)
2007-23 Renegade 500, 570, 800, 850 & 1000, All models
2012-23 Brute Force 750
2012-23 King Quad 750