2015 OUTLANDER 1000 Max Xtp
Dynojet PCV 25-009
Plug n play, adjusts fuel from -100/+250%, USB powered from computer, great tool for the experienced tuner, 10 throttle position columns, 2 position map switching function built-in(switch not included).
Fits: Can-Am
2012-15 Renegade 800 (All Models)
2012-15 Renegade 1000 (All Models)
2012-15 Outlander 800 (All Models)
2012-15 Outlander 1000 (All Models)
-
$639.95$581.71Add to cart
Dynojet PCV 25-027 W/Ignition
Plug n play, adjusts fuel from -100/+250%, allows +/- 20 degree of timing adjustment, USB powered from computer, great tool for the experienced tuner, 10 throttle position columns, 2 position map switching function built-in(switch not included).
Fits: Can-Am
2013-15 Renegade 500 (All Models)
2016-17 Renegade 570 (All Models)
2012-15 Renegade 800 (All Models)
2012-15 Renegade 1000 (All Models)
2013-15 Outlander 500 (All models)
2016-18 Outlander 570 (All Models)
2011-18 Outlander 650 (All Models)
2012-15 Outlander 800 (All Models)
2012-15 Outlander 1000 (All models)
-
$809.95$736.24Add to cart
Dynojet Power Commander 6 PC6-25027
DYNOJET’s PC6 was developed to simplify the user experience making choosing and tuning a map easier for the end user.
The Power Commander 6 fuel injection tuning device allows you to optimize your fuel and timing curve (where applicable) giving you the confidence to roam freely.
Featuring a plug-and-play setup, Power Commander 6 can be installed discreetly underneath your seat, cowl, dash or other location ensuring your ride looks as good as it runs.
Easily change & upgrade tunes as you upgrade parts
Comes with Power Core software that connects dyno runs with our EFI Tuning Devices to unlock your ride’s potential
Pair with other Power Commander accessories like the Autotune, Quickshifter or POD-300
Easily connects to your computer via USB
Each cylinder can be mapped individually and for each gear, giving riders more granular control
Removing the device reverts your vehicle completely back to stock.
One year warranty
Proudly made in the USA
-
$809.99$736.28Add to cart
Engine Ice ATV/UTV Coolant + Antifreeze 1.89L
Engine Ice is a high performance power sports engine coolant + antifreeze that reduces operating temperatures. This coolant is biodegradable, ready to use but not recommended to be mixed with other coolants.
Ready-To-Use
Boil-over protection to 125 C or 256F
Freeze protection to -33C or -28F
** UNIVERSAL FIT **
-
$45.95$41.35Add to cart
EPI Secondary Clutch Spring Red (Can-Am)
EPI’s red spring is a upgrade from the Can-Am OEM secondary clutch springs.
- 155lb @ 2.9″ load
- 215lbs @ 1.9″ load
Fitment:
- 2006-2022 Outlander 650, All models
- 2006-2015 Outlander 800, All models
- 2016-2022 Outlander 850, All models
- 2012-2022 Outlander 1000, All models
- 2007-2015 Renegade 800
- 2016-2021 Renegade 850
- 2012-2021 Renegade 1000
EPI Wheel Bearing Ez Greaser Tool 30mm Bore
EPI wheel bearing EZ greaser made from billet aluminum.
Fits:
All Balls # 25-1516
EPI # WE301411
** Must remove axle to grease bearings.**
EXTREME ATV Aluminum Shifter Handle
Extreme ATV billet aluminum shifter handle, anodized black with machined logo.
Can-am fitment:
- 2006-2023 Outlander 500, 570, 650, 800, 850, 1000 – All Models
- 2007-2023 Renegade 500, 570, 800, 850, 1000 – All Models
- 2013-2018 Maverick 1000 – All Models
Kawasaki fitment:
- 2006-2022 Brute Force 750 – All Models
EXTREME ATV Domed Aluminium Gas Cap Can-Am ATV
Extreme ATV billet aluminum gas cap, anodized black with machined logo & o-ring to seal.
Fitment:
- 2006-2023 Outlander 500, 570, 650, 800, 850, 1000 – All Models
- 2007-2023 Renegade 500, 570, 800, 850, 1000 – All Models
GATES 30C3750 G-Force C12 Belt
Gates G-force C12 cvt belt utilizes carbon tensile cord for minimal stretch & extraordinary strength. High-performance neoprene with a trapezoidal topnotch and rounded bottom cog design maximizing heat control and flexibility. Carbon tensile cords are bonded to aramid fiber-loaded rubber with specially formulated adhesion gum resulting in increased side-load resistance, preventing belt distortion and edge cord pullout.
Fitment:
2007-2015 Outlander 500 All Models
2016-2023 Outlander 570 All Models
2006-2022 Outlander 650 All Models
2006-2015 Outlander 800 All Models
2016-2023 Outlander 850 All Models
2012-2023 Outlander 1000 All Models
2008-2015 Renegade 500 All Models
2016-2022 Renegade 570 All Models
2007-2015 Renegade 800 All Models
2016-2022 Renegade 850 All Models
2012-2023 Renegade 1000 All Models
-
$179.99$161.99Add to cart
GATES 30R3750 G-Force Redline Belt
Gates G-force Redline cvt belts have a patented Ethylene Elastomer compound that delivers a 75% greater dynamic axial stiffness, up to 50% lower speed losses & better recovery from temperatures up to +170C(+338F) without power loss. Unmatched Temperature Capability – Runs cooler, resists glazing for better recovery and reduced cracking/chunking out after running at temps exceeding +149°C (+300°F). Extended Belt Life – Belt life increased 100-300% versus aftermarket competitive belts in severe duty lab test conditions and in field testing. Higher Power Capacity – Reduced speed (rpm) loss by 50% under high loads and increased load capacity by >10% compared to other aftermarket belt.
Fitment:
2006-2015 Outlander 800 All Models
2016-2023 Outlander 850 All Models
2012-2023 Outlander 1000 All Models
2007-2015 Renegade 800 All Models
2016-2022 Renegade 850 All Models
2012-2023 Renegade 1000 All Models
2013-2018 Maverick All Models
2016-2018 Maverick Turbo
2011-2020 Commander 800 All Models
2013-2020 Commander 1000 All Models
-
$223.95$201.56Add to cart
MOOSE Heated Clamp-On Grip Set Dual Zone
Moose dual zone clamp-on heated grips & thumb warmer by Heat Demon with ODI clamp-on grips. Fits most ATV’s & Snowmobiles with 7/8″ handlebars & a thumb throttle.
- One adhesive backed silicone thumb warmer
- Dual zone controller-select thumb and grip heat levels separately
- Five level power memory
- Grips use maximum 40 watts(20per grip) @ 14volts
- Thumb warmer use maximum 5 watts @ 14volts
** UNIVERSAL FIT **
-
$289.99$260.99Add to cart
MR. RPM Aluminium Intake Can-Am Atv 1000cc
Mr. Rpm A356 T-6 Aluminum air intake.
– Approx. 12mm wall thickness for full porting.
– 100% CNC machined.
– Accepts OEM injectors or Bosch.
Fitment:
2012-2023 Renegade 1000 All Models
2012-2023 Outlander 1000 All Models
-
$684.95Add to cart
MR. RPM ARP Head Stud Kit Can-Am
ARP head stud kit by MR. RPM. Stronger option to replace OEM studs when re-doing cylinder or upgrading to a bigger bore kit.
Fits all Can-Am v-twin Atv’s & SxS’s
650cc, 800cc & 850cc cylinders use 8pcs-head studs, nuts, washers & spacers
1000cc cylinders use 8pcs-head studs, nuts & washers
** Spacers only used on shorter 650, 800 & 850 cylinders **
-
$345.95Add to cart
MR. RPM Base Gasket Set .020″/Can-Am
MR. RPM replacement base gasket set for Can-Am v-twin engines.
Thickness: .020″
Fits all Can-Am v-twin Atv’s & SxS’s
500cc, 570cc, 650cc, 800cc, 850cc & 1000cc
MR. RPM cast aluminum valve cover & water neck set
MR. RPM cast aluminium valve covers & water necks. These sets are a direct replacement for the plastic Can-Am OEM models.
Includes:
2 – Valve covers, 8 – Valve cover bolts, 2- Water necks, 2- Bleeder bolts
Fitment:
All Can-Am 500, 570, 650, 800, 850 & 1000cc v-twin engines.
** Do not over tighten bolts & test fit before installation **
** Mild grinding may be required on the inside of the covers to clear some cams **
MR. RPM Head Gasket 91mm Bore 800/1000cc Can-Am
MR. RPM stock bore replacement head gasket.
Size: 91mm Bore
Fitment:
800cc & 1000cc Can-Am v-twin’s
** 2pcs required to re-do both cylinders **