ALL BALLS Wheel Bearing 25-1516
All Balls wheel bearing kits use sealed dual row radial bearings with SR1-2 grease.
Kit includes:
1 – Bearing
1- Seal
-
$38.95Add to cart
-
Camso 4S1 UTV Track System
Camso’s 4S1 UTV track system reaches the next level of performance in any conditions like deep snow, swamps, marshes, mud and muskeg.
ALL TRACKS:
- MADE TO ORDER & SHIP DIRECT FROM CAMSO
- MINIMUM 2 WEEKS DELIVERY
- MUST BE PICKED UP IN STORE
** PLEASE INCLUDE YEAR, MAKE & MODEL OF UTV WHEN ORDERING **
-
$6,419.95Add to cart
-
-5%
Dynojet PV3 PV3-25-04
Fueling revised, rev limit raised, speed limit raised, spark timing optimized for 91-93 octane, cooling fan engagement temp lowered, flash performance tunes via OEM diagnostic connector, real time data channel display, weather resistant, high contrast display.
Fits: Can-Am
2019-21 Maverick Trail 800
2019-21 maverick Trail 800 DPS
2018-20 Maverick Trail 1000
2019-20 Maverick Trail 1000 DPS
2019-21 Maverick Sport 1000
2019-20 Maverick Sport 1000 DPS & 1000R DPS
2020-21 Maverick Sport 1000R Xmr, Xxc, Xrc
-
$607.95Add to cart
-
EPI Wheel Bearing Ez Greaser Tool 30mm Bore
EPI wheel bearing EZ greaser made from billet aluminum.
Fits:
All Balls # 25-1516
EPI # WE301411
** Must remove axle to grease bearings.**
-
$57.99Add to cart
-
-10%
GATES G-Force Redline Belt – 48R4289
Gates G-force Redline cvt belts have a patented Ethylene Elastomer compound that delivers a 75% greater dynamic axial stiffness, up to 50% lower speed losses & better recovery from temperatures up to +170C(+338F) without power loss. Unmatched Temperature Capability – Runs cooler, resists glazing for better recovery and reduced cracking/chunking out after running at temps exceeding +149°C (+300°F). Extended Belt Life – Belt life increased 100-300% versus aftermarket competitive belts in severe duty lab test conditions and in field testing. Higher Power Capacity – Reduced speed (rpm) loss by 50% under high loads and increased load capacity by >10% compared to other aftermarket belt.
Fits Can-Am:
2016-2021 Defender HD8 All Models
2016-2021 Defender HD10 All Models
2018-2021 Maverick Trail 800 All Models
2018-2021 Maverick Trail 1000 All Models
2019-2021 Maverick Sport 1000 All Models
2018-2021 Maverick X3 All Models
Fits Ski-Doo:
2014 Summit SP 800, Sport 800, X 800
2018-2022 Renegade Backcountry 850
-
$241.19Add to cart
-
-10%
Maxima Coolanol Antifreeze Coolant 1.89 Liter
- Ready-to-use 50/50 antifreeze and deionized water.
- Optimum cooling, water pump lubrication & corrosion for aluminium & magnesium engines.
- Contains anti-foaming agents to reduce water pump cavitation and increase cooling.
- -37C to 129C.
- Nitrate, Amine, Borax Free
- 100% biodegradable in unused form.
- Safe for topping of with most oem fluids.
-
$25.16Add to cart
-
MR. RPM .020″ Base Gasket Set/Can-Am 650-1000cc
MR. RPM replacement base gasket set for Can-Am v-twin engines.
Thickness: .020″
Fits all Can-Am v-twin Atv’s & SxS’s
650cc, 800cc, 850cc & 1000cc
-
$16.95Add to cart
-
MR. RPM ARP Head Stud Kit Can-Am 650/800/850/1000cc
ARP head stud kit by MR. RPM. Stronger option to replace OEM studs when re-doing cylinder or upgrading to a bigger bore kit.
Fits all Can-Am v-twin Atv’s & SxS’s
650cc, 800cc & 850cc cylinders use 8pcs-head studs, nuts, washers & spacers
1000cc cylinders use 8pcs-head studs, nuts & washers
** Spacers only used on shorter 650, 800 & 850 cylinders **
-
$265.95Add to cart
-
MR. RPM Big Bore Head Gasket 93mm Bore
MR. RPM big bore replacement head gasket for 93mm Can-Am v-twin engines.
ONLY fits Can-Am v-twin Atv’s & SxS’s with
650cc & 800cc bored to 93mm or 840cc
1000cc bored to 93mm or 1018cc
** 2pcs required to re-do both cylinders **
-
$85.95Add to cart
-
MR. RPM cast aluminum valve cover & water neck set /Can-Am V-Twin
MR. RPM cast aluminium valve covers & water necks are direct replacement for plastic Can-Am OEM models.
Fits:
All Can-Am 500, 570, 650, 800, 850 & 1000cc v-twin engines.
** Do not over tighten bolts & test fit before installation **
** Mild grinding may be required on the inside of the covers to clear some cams **
-
$54.95Add to cart
-
MR. RPM cast aluminum valve cover set/Can-Am V-Twin
MR. RPM cast aluminium valve covers are direct replacement for plastic Can-Am OEM models.
Fits:
All Can-Am 500, 570, 650, 800, 850 & 1000cc v-twin engines.
** Do not over tighten bolts & test fit before installation **
** Mild grinding may be required on the inside of the covers to clear some cams **
Only Available at Calgary Store
-
$42.95Add to cart
-
MR. RPM Head Gasket 91mm Bore 800cc & 1000cc Can-Am
MR. RPM stock bore replacement head gasket for Can-Am v-twin engines.
Size: 91mm Bore
Fits:
Can-Am v-twin Atv’s & SxS’s
800cc & 1000cc
-
$50.95Add to cart
-
-5%
Super Atv 3″ Spring Spacer Lift/LK-CA-T
Super ATV’s lift kits are perfect for any type of riding and allow you to install larger tires or gain clearance to make it over rocks or hills. All Super Atv lift kits include mounting hardware, installation instructions & are backed by their lifetime warranty.
Fits: Can-Am Defender
- 2016-2021 Defender HD10 Xt-Cab
- 2017-2021 Defender HD10 Xt-Cab Max
- 2019-21 Defender HD10 Xmr
- 2019-21 Defender HD10 Xmr Max
- 2020-21 Defender HD10 Limited
- 2020-21 Defender HD10 Limited Max
- 2019-21 Defender HD10 Lonestar Max
Can-Am Maverick
- 2018-21 Maverick Trail 800
- 2018-21 Maverick Trail 1000
- 2019-21 Maverick Sport 1000 (DOESN’T FIT Xmr, Xrc, Xxc or Max Models)
-
$334.35Add to cart
-
VERTEX valve cover gasket/Can-Am 500-1000cc
Vertex/Winderosa are a great aftermarket replacement for stock gaskets.
Fits:
All Can-Am v-twin Atv’s & SxS’s
500, 570cc – 1pc required
650, 800, 850 & 1000cc – 2 pcs required
-
$15.95Add to cart
-
