HD10
ALL BALLS Wheel Bearing 25-1516
ALL BALLS wheel bearing kits use sealed dual row radial bearings with SR1-2 grease.
Kit includes:
1 – Bearing
1 – Seal
Click n Go 2 Mount 374409
Fits:
17-19 Can-Am Defender HD5
16-19 Defender HD8 XT
17-19 Defender HD8 Max
16-19 Defender HD10/CAB
17-19 Defender HD10 Max/XT
Will Not Fit Lone Star
- Use with Click n Go 2 Push Frames
- Includes mounting plates & hardware.
-
$229.99Add to cart
Dynojet PV3 PV3-25-09
Dynojet’s PV3 offers all the benefit’s of the PV5 and more.
Fits: Can-Am
2018-21 Defender HD10 DPS, XT, Xmr & Max
2018-20 Defender HD10 XT-p, XT Cab & Max
2020 Defender HD10 Pro & Max
2020-21 Defender HD10 Limited & Max
2018-20 Defender HD8 DPS, XT, XT CAB & Max
2018-20 Defender HD5
-
$639.95$581.71Add to cart
GATES 48C4289 G-Force C12 Belt
Gates G-force C12 cvt belt utilizes carbon tensile cord for minimal stretch & extraordinary strength. High-performance neoprene with a trapezoidal topnotch and rounded bottom cog design maximizing heat control and flexibility. Carbon tensile cords are bonded to aramid fiber-loaded rubber with specially formulated adhesion gum resulting in increased side-load resistance, preventing belt distortion and edge cord pullout.
Fits Can-Am:
2016-2021 Defender HD8 All Models
2016-2021 Defender HD10 All Models
2018-2021 Maverick Trail 800 All Models
2018-2021 Maverick Trail 1000 All Models
2019-2021 Maverick Sport 1000 All Models
2018-2021 Maverick X3 All Models
Fits Ski-Doo:
2014 Summit SP 800, Sport 800, X 800
2018-2022 Renegade Backcountry 850
-
$185.99$167.39Add to cart
GATES 48R4289 G-Force Redline Belt
- Gates G-force Redline cvt belts have a patented Ethylene Elastomer compound that delivers a 75% greater dynamic axial stiffness, up to 50% lower speed losses & better recovery from temperatures up to +170C(+338F) without power loss.
- Unmatched Temperature Capability – Runs cooler, resists glazing for better recovery and reduced cracking/chunking out after running at temps exceeding +149°C (+300°F).
- Extended Belt Life – Belt life increased 100-300% versus aftermarket competitive belts in severe duty lab test conditions and in field testing.
- Higher Power Capacity – Reduced speed (rpm) loss by 50% under high loads and increased load capacity by >10% compared to other aftermarket belt.
-
$299.95$269.96Add to cart
KFI Winch Mount 101305
KFI winch mount 101305 for most 2,000lb to 4,500lb winches(see list below), 100% made in USA, powdercoated black, 3/16″ material, includes mounting hardware.
Models:
2017-2020 Defender HD5 (All Models)
2016-2020 Defender HD8, MAX(All Models)
2018-2020 Defender HD10, MAX(All Models)
Roller fairlead & winch not included
SUPER ATV 2″ Offset High Clearance A-Arms AA-CA-DEF-2-HC-001-02
$608.95 $578.50Add to cart
SUPER ATV 2″ Offset High Clearance A-Arms AA-CA-DEF-2-HC-001-02
SUPER ATV’s high clearance 2″ forward offset upper & lower a-arms are 25% stronger than stock. These arms are made from 1.25″ tubing and powder coated black. They offer full camber adjustment & are offset forward to allow up to 32″ tires.
** DOESN’T INCLUDE BUSHINGS OR BALL JOINTS **
FITS:
2016-2019 Defender HD10, HD10 DPS, HD 10XT
2017-2019 Defender Max HD10 DPS, Max HD1 0XT
2016-2017 Defender HD10 XT CAB
2017 Defender Max HD10 XT CAB
2018-2019 Defender HD10 XTP, HD10 Mossy Oak
Also Fits:
2016-2021 Defender HD8, HD8 DPS, HD8 XT
2017-2021 Defender Max HD8, Max HD8 DPS, Max HD8 XT
2017-2021 Defender HD5
2017-2019 Defender HD5 DPS
** ONLY fits models listed **
-
$608.95$578.50Add to cart
SUPER ATV 2″ OFFSET HIGH CLEARANCE A-ARMS AA-CA-DEFXMR-2-HC-02
$608.95 $578.50Add to cart
SUPER ATV 2″ OFFSET HIGH CLEARANCE A-ARMS AA-CA-DEFXMR-2-HC-02
SUPER ATV’s high clearance 2″ forward offset upper & lower a-arms are 25% stronger than stock. These arms are made from 1.25″ tubing and powder coated black. They offer full camber adjustment & are offset forward to allow up to 34″ tires.
** DOESN’T INCLUDE BUSHINGS OR BALL JOINTS **
FITS:
2018-2021 Defender HD10 Xmr
2019-2021 Defender Max HD10 Xmr
2018-2021 Defender HD10 XT Cab
2018-2021 Defender Max HD10 XT Cab
2020-2021 Defender HD10 Mossy Oak
2020-2021 Defender HD10 Limited
2020-2021 Defender Max HD10 Limited
2018-2021 Defender Max HD10 Lone Star Edition
2021 Defender HD10 Pro Limited Cab
** ONLY fits models listed **
-
$608.95$578.50Add to cart
SUPER ATV 3″ Spring Spacer Lift LK-CA-DEF
Super ATV’s lift kits are perfect for any type of riding and allow you to install larger tires or gain clearance to make it over rocks or hills. All Super Atv lift kits include mounting hardware, installation instructions & are backed by their lifetime warranty.
Fits: Can-Am Defender
- 2016-2021 Defender HD10
- 2016-2021 Defender HD10 Dps
- 2017-2021 Defender HD10 Dps Max
- 2016-2021 Defender HD10 Xt
- 2017-2021 Defender HD10 Xt Max
- 2018-2021 Defender HD10 Xtp
- 2020-2021 Defender HD10 6×6
- 2018-2021 Defender HD10 Mossy Oak
- 2018 Defender HD10 Xmr
- 2018 Defender HD10 Lonestar Max
- 2016-2021 Defender HD8
- 2017-2021 Defender HD8 Max
- 2016-2021 Defender HD8 Xt
- 2017-2021 Defender HD8 Xt Max
- 2016-2021 Defender HD8 Dps
- 2017-2021 Defender HD8 Dps Max
-
$270.95$257.40Add to cart
Super Atv 3″ Spring Spacer Lift LK-CA-T
Super ATV’s lift kits are perfect for any type of riding and allow you to install larger tires or gain clearance to make it over rocks or hills. All Super Atv lift kits include mounting hardware, installation instructions & are backed by their lifetime warranty.
Fits: Can-Am Defender
- 2016-2021 Defender HD10 Xt-Cab
- 2017-2021 Defender HD10 Xt-Cab Max
- 2019-21 Defender HD10 Xmr
- 2019-21 Defender HD10 Xmr Max
- 2020-21 Defender HD10 Limited
- 2020-21 Defender HD10 Limited Max
- 2019-21 Defender HD10 Lonestar Max
Can-Am Maverick
- 2018-21 Maverick Trail 800
- 2018-21 Maverick Trail 1000
- 2019-21 Maverick Sport 1000 (DOESN’T FIT Xmr, Xrc, Xxc or Max Models)
-
$351.95$334.35Add to cart
SUPER ATV SR Full Windshield WS-CA-DEF-70
SUPER ATV windshield is made of 1/4” polycarbonate with thier proprietary XR Optic Hard Coating for unmatched scratch resistance.
Fits the contours of your cage and hood perfectly & can be used with most soft or hard tops.
Comes complete with all hardware for easy installation
Made in the USA
Fits:
2016-2021 Defender HD10
2016-2021 Defender HD10 Dps
2017-2021 Defender HD10 Dps Max
2016-2021 Defender HD10 XT
2017-2021 Defender HD10 XT Max
2016-2021 Defender HD10 XT-Cab
2017-2021 Defender HD10 XT-Cab Max
2018-2021 Defender HD10 XTP
2018-2021 Defender HD10 Mossy Oak
2018-2021 Defender HD10 XMR
2019-2021 Defender HD10 XMR Max
2020-2021 Defender Limited HD10
2020-2021 Defender HD10 Limited Max
2020-2021 Defender Pro HD10
2020-2021 Defender HD10 6×6
2018-2021 Defender HD10 Lone Star Edition Max
2016-2021 Defender HD8
2017-2021 Defender HD8 Max
2016-2021 Defender HD8 DPS
2017-2021 Defender HD8 DPS Max
2016-2021 Defender HD8 XT
2017-2021 Defender HD 8 XT Max
2016-2021 Defender HD8 XT Cab
2017-2021 Defender HD8 XT Cab Max
-
$506.95$481.60Add to cart
VERTEX valve cover gasket 817989
Vertex gaskets are a great aftermarket replacement for stock. Sold as each.
Fitment:
Can-Am V-twin 500, 570, 650, 800, 850 & 1000cc Atv’s & SxS’s
** 2pcs required for most applications **