06-12 Outlander & Renegade RHINO Front Left Axle
Super ATV’s Rhino axles are made from heavy-duty 4340 chromoly steel, have high articulation angles and are packed with a synthetic grease to keep your CVs running cool each time you ride. 12 month warranty
Fits:
06-12 Outlander
- All Models
06-12 Outlander Max
- All Models
06-12 Renegade
- All Models
-
$279.95$251.96Add to cart -
08-09 Renegade 500 RJWC Programmer
Fits: Can-Am
2008-09 Renegade 500 (All models)
Pre-programmed for Stage 1(Aftermarket pipe & air filter)modifications.
plug n play, push button interface, full range of tuning.
RJWC fuel programmer by Dobeck Performance.
-
$396.00Add to cart
-
08-16 Ski-Doo 600/800 Carb PTEK GGB Mountain Muffler
Fits:
- 08-16 MXZ/REV XP/Summit/Renegade/Sport/800R HO/600RS/500SS/PTEK(Carb)
GGB Mountain muffler is super lightweight, straight through flow design with an aggressive exhaust note. System fits securely in the stock location using stock mounts & is guaranteed to provide performance levels as good as or better then stock.
-
$269.95$256.45Add to cart -
10-15 Renegade 500 RJWC Programmer
Fits: Can-Am
2010-15 Renegade 500 (All models)
Pre-programmed for Stage 1(Aftermarket pipe & air filter)modifications.
plug n play, push button interface, full range of tuning.
RJWC fuel programmer by Dobeck Performance.
-
$396.00Read more
-
12-14 Renegade 500 Dynojet PCFC
Fits: Can-Am
2012-14 Renegade 500 (All models)
Plug n play, +250/-100 fuel changes by +/-10% increments in low, mid & high rpm ranges while sitting on bike, or adjust fuel map on computer using supplied software, 10 maps can be downloaded & then selected while on bike, PCV fuel maps are compatible & can be downloaded to the PCFC.
-
$349.95$314.95Add to cart -
12-15 Renegade 500 RJWC centered single slip-on
RJWC Mud Edition
Centered mount, Single slip-on, Stainless steel, Billet aluminum clamp-on end caps, Repackable, Handbuilt & assembled in Sweden.
EFI Tuner recommended.
Fits:
2013-15 Renegade 500
-
$732.00Read more
-
13-15 Renegade 500 Dynojet PCV W/Ignition
Fits: Can-Am
2013-15 Renegade 500 (All models)
Plug n play, adjusts fuel from -100/+250%, allows +/- 20 degree of timing adjustment, USB powered from computer, great tool for the experienced tuner, 10 throttle position columns, 2 position map switching function built-in(switch not included).
-
$574.95$517.46Add to cart -
13-19 Outlander & Renegade RHINO Front Left Axle
Super ATV’s Rhino axles are made from heavy-duty 4340 chromoly steel, have high articulation angles and are packed with a synthetic grease to keep your CVs running cool each time you ride. 12 month warranty
Fits:
13-19 Outlander
- All Models
13-19 Outlander Max
- All Models
13-19 Renegade
- All Models
-
$279.95$251.96Add to cart -
17-20 Ski-Doo Gen 4 850 E-TEC GGB Mountain Muffler
Fits:
- 17-20 Ski-Doo Gen 4 MXZ 850 E-TEC
- 17-20 Ski-Doo Gen 4 Rengade 850 E-TEC
- 17-20 Ski-Doo Gen 4 Summit 850 E-TEC
GGB Mountain muffler is super lightweight, straight through flow design with an aggressive exhaust note. System fits securely in the stock location using stock mounts & is guaranteed to provide performance levels as good as or better then stock.
-
$269.95$256.45Add to cart -
GATES G-Force C12 Belt – 30C3750
Gates G-force C12 cvt belt utilizes carbon tensile cord for minimal stretch & extraordinary strength. High-performance neoprene with a trapezoidal topnotch and rounded bottom cog design maximizing heat control and flexibility. Carbon tensile cords are bonded to aramid fiber-loaded rubber with specially formulated adhesion gum resulting in increased side-load resistance, preventing belt distortion and edge cord pullout.
Fits:
07-20 Outlander
- 500, 570, 650, 800, 850, 1000 All Models
07-20 Renegade
- 500, 570, 800, 800, 850, 1000 All Models
13-18 Maverick
- All Models
11-20 Commander
- 800, 1000 All Models
-
$144.99$130.49Add to cart -
GATES G-Force Redline Belt – 30R3750
Gates G-force Redline cvt belts have a patented Ethylene Elastomer compound that delivers a 75% greater dynamic axial stiffness, up to 50% lower speed losses & better recovery from temperatures up to +170C(+338F) without power loss. Unmatched Temperature Capability – Runs cooler, resists glazing for better recovery and reduced cracking/chunking out after running at temps exceeding +149°C (+300°F). Extended Belt Life – Belt life increased 100-300% versus aftermarket competitive belts in severe duty lab test conditions and in field testing. Higher Power Capacity – Reduced speed (rpm) loss by 50% under high loads and increased load capacity by >10% compared to other aftermarket belt.
Fits:
07-20 Outlander
- 800, 850, 1000 All Models
07-20 Renegade
- 800, 800, 850, 1000 All Models
13-18 Maverick
- All Models
11-20 Commander
- 800, 1000 All Models
-
$222.99$178.39Add to cart -
Gen 1 single slip-on mud edition muffler RJWC 1184
RJWC Mud Edition single slip-on muffler, stainless steel, billet aluminum clamp-on end caps, re-packable. Handbuilt & assembled in Sweden.
EFI Tuner recommended.
Fits:
2007-12 Outlander 500
2006-12 Outlander 650
2006-12 Outlander 800
2008-12 Renegade 500
2007-12 Renegade 800
-
$705.00Add to cart
-
Gen 2 Outlander & Renegade Airbox Seal OMC
OMC (Outsider’s Mud Crew) HD replacement airbox seal.
Fits All Gen 2
13-19 Can-Am Outlander (All Models)
13-19 Can-Am Renegade (All Models)
-
$29.95Add to cart
-
Gen 2 Single Slip-On Mud Edition Muffler RJWC 1189
RJWC Mud Edition single slip-on, stainless steel, billet aluminum clamp-on end caps & re-packable. Handbuilt & assembled in Sweden.
EFI Tuner recommended.
Fits:
2012-15 Renegade 500
2016-18 Renegade 570
2013-15 Renegade 800
2016-18 Renegade 850
2012-18 Renegade 1000
-
$705.00Read more
-
Gen 2 split dual slip-on mud edition muffler RJWC 1191
RJWC Mud Edition split, dual slip-on, stainless steel, billet aluminum clamp-on end caps & re-packable. Handbuilt & assembled in Sweden.
EFI Tuner recommended.
Fits:
2012-15 Renegade 500
2016-18 Renegade 570
2013-15 Renegade 800
2016-18 Renegade 850
2012-18 Renegade 1000
-
$1,001.00Read more
-
Outlander/Renegade 1000 Aluminium Intake
Fits: Can-Am 1000cc engines
– ATV use only.
– A356 T-6 Aluminium.
– Approx. 12mm wall thickness for full porting.
– 100% CNC machined.
– Accepts OEM injectors or Bosch.
-
$556.95Add to cart
-
