RZR
14 RZR 1000XP RJWC dual slip-on 1212
RJWC Mud Edition
Dual slip-on, Stainless steel, Billet aluminum clamp-on end caps, Repackable, Handbuilt & assembled in Sweden.
EFI Tuner recommended.
Fits:
2014 RZR 1000XP
-
$1,202.00$901.50Add to cart
14-18 RZR 1000XP Dynojet PV3
Fits: Polaris
2014-18 RZR 1000XP (All Models)
Fueling revised, rev limit raised, speed limit raised, spark timing optimized for 91-93 octane, flash performance tunes via OEM diagnostic connector, real time data channel display, weather resistant, high contrast display.
-
$579.95$521.96Add to cart
15-18 RZR 1000XP RJWC 1240
Fits: Polaris
2015-18 RZR 1000XP (All models)
Pre-programmed for Stage 1(Aftermarket pipe & air filter)modifications.
plug n play, push button interface, full range of tuning.
RJWC fuel programmer by Dobeck Performance
-
$401.95Add to cart
15-19 RZR 1000XP RJWC dual slip-on 1213
RJWC Mud Edition
Dual slip-on, Stainless steel, Billet aluminum clamp-on end caps, Repackable, Handbuilt & assembled in Sweden.
EFI Tuner recommended.
Fits:
2015-18 RZR 1000XP
2016-19 RZR 1000XP High Lifter
-
$1,202.00$901.50Add to cart
GATES G-Force C12 Belt – 19C3982
Gates G-force C12 cvt belt utilizes carbon tensile cord for minimal stretch & extraordinary strength. High-performance neoprene with a trapezoidal topnotch and rounded bottom cog design maximizing heat control and flexibility. Carbon tensile cords are bonded to aramid fiber-loaded rubber with specially formulated adhesion gum resulting in increased side-load resistance, preventing belt distortion and edge cord pullout.
Fits:
08-12 RZR 800
16-20 Sportsman 500
14-20 Sportsman 570
08-14 Sportsman 800
-
$144.99$130.49Add to cart
GATES G-Force C12 Belt – 21C4140
Gates G-force C12 cvt belt utilizes carbon tensile cord for minimal stretch & extraordinary strength. High-performance neoprene with a trapezoidal topnotch and rounded bottom cog design maximizing heat control and flexibility. Carbon tensile cords are bonded to aramid fiber-loaded rubber with specially formulated adhesion gum resulting in increased side-load resistance, preventing belt distortion and edge cord pullout.
Fits:
11-14 RZR 900XP
14 RZR 1000XP
-
$144.99$130.49Add to cart
GATES G-Force C12 Belt – 24C4022
Gates G-force C12 cvt belt utilizes carbon tensile cord for minimal stretch & extraordinary strength. High-performance neoprene with a trapezoidal topnotch and rounded bottom cog design maximizing heat control and flexibility. Carbon tensile cords are bonded to aramid fiber-loaded rubber with specially formulated adhesion gum resulting in increased side-load resistance, preventing belt distortion and edge cord pullout.
Fits:
10-14 Ranger 800
10-12 Ranger 800XP
13-14 RZR 800
10-14 RZR 800-S
-
$144.99$130.49Add to cart
GATES G-Force C12 Belt – 26C4140
Gates G-force C12 cvt belt utilizes carbon tensile cord for minimal stretch & extraordinary strength. High-performance neoprene with a trapezoidal topnotch and rounded bottom cog design maximizing heat control and flexibility. Carbon tensile cords are bonded to aramid fiber-loaded rubber with specially formulated adhesion gum resulting in increased side-load resistance, preventing belt distortion and edge cord pullout.
Fits:
15-20 RZR 900
15-17 RZR 900-S
-
$188.99$170.09Add to cart
GATES G-Force C12 Belt – 27C4159
Gates G-force C12 cvt belt utilizes carbon tensile cord for minimal stretch & extraordinary strength. High-performance neoprene with a trapezoidal topnotch and rounded bottom cog design maximizing heat control and flexibility. Carbon tensile cords are bonded to aramid fiber-loaded rubber with specially formulated adhesion gum resulting in increased side-load resistance, preventing belt distortion and edge cord pullout.
Fits:
15-20 RZR 1000XP
16-20 RZR 1000-S
-
$144.99$130.49Add to cart
GATES G-Force Redline Belt – 27R4159
Gates G-force Redline cvt belts have a patented Ethylene Elastomer compound that delivers a 75% greater dynamic axial stiffness, up to 50% lower speed losses & better recovery from temperatures up to +170C(+338F) without power loss. Unmatched Temperature Capability – Runs cooler, resists glazing for better recovery and reduced cracking/chunking out after running at temps exceeding +149°C (+300°F). Extended Belt Life – Belt life increased 100-300% versus aftermarket competitive belts in severe duty lab test conditions and in field testing. Higher Power Capacity – Reduced speed (rpm) loss by 50% under high loads and increased load capacity by >10% compared to other aftermarket belt.
Fits:
15-20 RZR 1000XP
16-20 RZR 1000-S
-
$222.99$178.39Add to cart
RZR 1000-S/General RJWC dual slip-on 1293
RJWC Mud Edition
Dual slip-on, Stainless steel, Billet aluminum clamp-on end caps, Repackable, Handbuilt & assembled in Sweden.
EFI Tuner recommended.
Fits:
2016-18 RZR 1000-S
2016-18 General 1000
-
$1,202.00$901.50Add to cart
RZR900, 1000, General Click n Go 2 Mount
Fits:
15-18 Polaris RZR900
15-18 Polaris RZR900-S
14-18 RZR 1000XP(Will not fit Fox Edition)
15-16 RZR 1000XP High Lifter(Will Not Fit Not 1000-4)
14-18 RZR 1000XP-4
16-18 General 1000
- Use with Click n Go 2 Push Frames
- Includes mounting plates & hardware.
-
$149.99$127.49Add to cart
RZR 570, RZR 800 Winch Mount
KFI winch mount 100660 for most 2,000lb to 3,500lb winches(see list below), 100% made in USA, powdercoated black, 3/16″ material, includes mounting hardware.
Models:
2012-2020 RZR 570
2008-2014 RZR 800
2009-2014 RZR 800-S
2010-2014 RZR 800-**
**= 12-14 Requires wire extension kit # UTV-WEK
Roller fairlead & winch not included
-
$79.99$71.99Add to cart
11-14 RZR 900XP UNI Filter NU8516ST
Fits: Polaris
2011-14 RZR 900XP
– Open cell polyurethane foam.
– For best results pre-oil with air filter oil.
– Can be easily washed, re-oiled & re-used.
-
$103.99$93.59Add to cart
11-14 RZR 900XP Winch Mount
KFI winch mount 100765 for most 2,000lb to 3,500lb winches(see list below), 100% made in USA, powdercoated black, 3/16″ material, includes mounting hardware.
Models:
2011-2014 RZR 900XP
2011-2014 RZR 900-4XP **
** = Requires wire extension kit #UTV-WEK
Roller fairlead & winch not included
-
$111.99$100.79Add to cart
15-20 RZR 900/1000/Turbo/General Winch Mount
KFI winch mount 101735 for most 2,000lb to 4,500lb winches(see list below), 100% made in USA, powdercoated black, 3/16″ material, includes mounting hardware.
Models:
2015-2020 RZR 900 Trail, EPS, Premium, Fox Edition
2015-2018 RZR 900-4 **
2015-2020 RZR 900 S EPS, Premium
2018 RZR 900 S 4 **
2014-2020 RZR 1000XP Premium, Ride Command, Dynamix, LE
2014-2020 RZR 1000-4XP**
2015-2020 RZR 1000S
2018-2020 RZR 1000-4 S**
2016-2020 RZR Turbo LE, Dynamix
2016-2020 RZR Turbo-4 LE, Dynamix**
2016-2020 General 1000 Deluxe, Premium
2016-2020 General 1000-4**
** = Requires wire extension kit #UTV-WEK
Roller fairlead & winch not included
-
$97.99$88.19Add to cart