Camso Ripsaw II, 15″x129″, 2.86″ Pitch
Recommended Use: TRAIL
- P2S1 = 2 Open, 1 closed with a guide clip every 3rd pitch.
- 1.25″ Lug height.
- Designed for all around trail performance with excellent traction on both hard pack & soft snow.
- Cupped center & full outer lugs with sharp angled lugs for excellent bite on hard packed snow.
- Lug design generates less noise for improved rider comfort on hard packed snow.
- Tapered outside lug edges for less bite while cornering.
PICK UP IN WINNIPEG or CALGARY ONLY
Additional information
Weight | 40 lbs |
---|---|
Dimensions | 21 × 20 × 17 in |
Only logged in customers who have purchased this product may leave a review.
Product Inquiry
Related products
Dynojet PV3 PV3-19-04
Fits: Polaris
2014-19 RZR 1000XP EPS & -4
2020-21 RZR XP 1000 & -4
2020-21 RZR XP1000 Premium & -4
2015-19 RZR XP1000 EPS High Lifter & -4
2020-21 RZR XP1000 High Lifter & -4
Fueling revised, rev limit raised, speed limit raised, spark timing optimized for 91-93 octane, flash performance tunes via OEM diagnostic connector, real time data channel display, weather resistant, high contrast display.
$699.95 $636.25Add to cart
Dynojet PV3 PV3-19-04
Fits: Polaris
2014-19 RZR 1000XP EPS & -4
2020-21 RZR XP 1000 & -4
2020-21 RZR XP1000 Premium & -4
2015-19 RZR XP1000 EPS High Lifter & -4
2020-21 RZR XP1000 High Lifter & -4
Fueling revised, rev limit raised, speed limit raised, spark timing optimized for 91-93 octane, flash performance tunes via OEM diagnostic connector, real time data channel display, weather resistant, high contrast display.
$699.95 $636.25Add to cart
RJWC dual slip-on 1212
RJWC Mud Edition
Dual slip-on, Stainless steel, Billet aluminum clamp-on end caps, Repackable, Handbuilt & assembled in Sweden.
EFI Tuner recommended.
Fits:
2014 RZR 1000XP
$1,202.00 $841.40Add to cart
RJWC dual slip-on 1212
RJWC Mud Edition
Dual slip-on, Stainless steel, Billet aluminum clamp-on end caps, Repackable, Handbuilt & assembled in Sweden.
EFI Tuner recommended.
Fits:
2014 RZR 1000XP
$1,202.00 $841.40Add to cart
Camso Hacksaw, 15″x121″, 2.52″ Pitch, Pre-Holed
Recommended Use: TRAIL
- 144 Pre-holes for quick stud install.
- Fully clipped.
- 1″ Lug height.
- Lug height for low rolling resistance that improves fuel economy.
- Crescent lug features recessed tips & cutting edges for forward & lateral bite on hard pack.
- Hard-wearing rigid lugs with a narrow base.
- Attack angle lugs guarantee superior performance on hard groomed trails.
PICK UP IN WINNIPEG or CALGARY ONLY
Camso Hacksaw, 15″x121″, 2.52″ Pitch, Pre-Holed
Recommended Use: TRAIL
- 144 Pre-holes for quick stud install.
- Fully clipped.
- 1″ Lug height.
- Lug height for low rolling resistance that improves fuel economy.
- Crescent lug features recessed tips & cutting edges for forward & lateral bite on hard pack.
- Hard-wearing rigid lugs with a narrow base.
- Attack angle lugs guarantee superior performance on hard groomed trails.
PICK UP IN WINNIPEG or CALGARY ONLY
Camso Cobra, 15″x121″, 2.52″ Pitch
Recommended Use: TRAIL
- Fully Clipped.
- 1.352″ Lug height.
- Cupped lugs for superior acceleration & braking in loose snow.
- Keep a firm grip on the trail.
- Flexible lug design for superior off-trail performance.
- Softer , thinner lugs generate less noise for improved rider comfort.
PICK UP IN WINNIPEG or CALGARY ONLY
Camso Cobra, 15″x121″, 2.52″ Pitch
Recommended Use: TRAIL
- Fully Clipped.
- 1.352″ Lug height.
- Cupped lugs for superior acceleration & braking in loose snow.
- Keep a firm grip on the trail.
- Flexible lug design for superior off-trail performance.
- Softer , thinner lugs generate less noise for improved rider comfort.
PICK UP IN WINNIPEG or CALGARY ONLY
SYA warrior Snorkel kit 0080
Snorkel Your ATV 3″ Warrior riser snorkel kit
Warrior risers:
3″ risers, exclusive to SYA, paintable, slide & lock together, built in vent line slots, includes warrior wear pre filter tips.
Kit:
3″ all hard pipe kit, 2014 only uses 3 risers, snorkels CVT inlet, outlet & airbox,connects to factory air intake, includes vent lines & connectors.
All connections must be glued & checked before use.
$571.95Add to cart
SYA warrior Snorkel kit 0080
Snorkel Your ATV 3″ Warrior riser snorkel kit
Warrior risers:
3″ risers, exclusive to SYA, paintable, slide & lock together, built in vent line slots, includes warrior wear pre filter tips.
Kit:
3″ all hard pipe kit, 2014 only uses 3 risers, snorkels CVT inlet, outlet & airbox,connects to factory air intake, includes vent lines & connectors.
All connections must be glued & checked before use.
$571.95Add to cart
UNI Air Filter NU8518ST
Open cell polyurethane foam. For best results pre-oil with air filter oil. Can be easily washed, re-oiled & re-used.
Fits: Polaris
2013-21 Scrambler 850XP
2014-18 Scrambler 1000XP
2009-15 Sportsman 850XP
2015-21 Sportsman 850SP
2016-19 Sportsman 850 High Lifter
2017-21 Sportsman 1000XP
2017-21 Sportsman 1000 High Lifter
2009-15 Sportsman 550XP
$49.99 $44.99Add to cart
UNI Air Filter NU8518ST
Open cell polyurethane foam. For best results pre-oil with air filter oil. Can be easily washed, re-oiled & re-used.
Fits: Polaris
2013-21 Scrambler 850XP
2014-18 Scrambler 1000XP
2009-15 Sportsman 850XP
2015-21 Sportsman 850SP
2016-19 Sportsman 850 High Lifter
2017-21 Sportsman 1000XP
2017-21 Sportsman 1000 High Lifter
2009-15 Sportsman 550XP
$49.99 $44.99Add to cart
Camso Cobra, 15″x129″, 2.86″ Pitch
Recommended Use: TRAIL
- P2S1 = 2 Open, 1 closed & a guide clip every 3rd window.
- 1.352″ Lug Height.
- Cupped lugs for superior acceleration & braking in loose snow.
- Keep a firm grip on the trail.
- Flexible lug design for superior off-trail performance.
- Softer , thinner lugs generate less noise for improved rider comfort.
PICK UP IN WINNIPEG or CALGARY ONLY
$1,035.95Add to cart
Camso Cobra, 15″x129″, 2.86″ Pitch
Recommended Use: TRAIL
- P2S1 = 2 Open, 1 closed & a guide clip every 3rd window.
- 1.352″ Lug Height.
- Cupped lugs for superior acceleration & braking in loose snow.
- Keep a firm grip on the trail.
- Flexible lug design for superior off-trail performance.
- Softer , thinner lugs generate less noise for improved rider comfort.
PICK UP IN WINNIPEG or CALGARY ONLY
$1,035.95Add to cart
KFI Winch Mount 101345
KFI winch mount 101345 for most 2,000lb to 4,500lb winches(see list below), 100% made in USA, powdercoated black, 3/16″ material, includes mounting hardware.
Models:
2013-2019 Ranger 900XP
2014-2019 Ranger 900XP Crew**
2017 Ranger 1000XP, Northstar Edition(HVAC)
2017-2018 Ranger 1000XP Crew, Northstar Edition(HVAC)**
2015-2016 Ranger 570 & XP Full Size(900 body style)
2015-2016 Ranger 570-6 Crew Full Size(900 style body style)**
** = Requires wire extension kit #UTV-WEK
Roller fairlead & winch not included
KFI Winch Mount 101345
KFI winch mount 101345 for most 2,000lb to 4,500lb winches(see list below), 100% made in USA, powdercoated black, 3/16″ material, includes mounting hardware.
Models:
2013-2019 Ranger 900XP
2014-2019 Ranger 900XP Crew**
2017 Ranger 1000XP, Northstar Edition(HVAC)
2017-2018 Ranger 1000XP Crew, Northstar Edition(HVAC)**
2015-2016 Ranger 570 & XP Full Size(900 body style)
2015-2016 Ranger 570-6 Crew Full Size(900 style body style)**
** = Requires wire extension kit #UTV-WEK
Roller fairlead & winch not included
Reviews
There are no reviews yet.