GATES 21R4140 G-Force Redline Belt
$229.99 $206.99
Gates G-force Redline cvt belts have a patented Ethylene Elastomer compound that delivers a 75% greater dynamic axial stiffness, up to 50% lower speed losses & better recovery from temperatures up to +170C(+338F) without power loss. Unmatched Temperature Capability – Runs cooler, resists glazing for better recovery and reduced cracking/chunking out after running at temps exceeding +149°C (+300°F). Extended Belt Life – Belt life increased 100-300% versus aftermarket competitive belts in severe duty lab test conditions and in field testing. Higher Power Capacity – Reduced speed (rpm) loss by 50% under high loads and increased load capacity by >10% compared to other aftermarket belt.
Fits:
2011-2014 RZR 900XP
2014 RZR 1000XP
Additional information
Weight | 2 lbs |
---|---|
Dimensions | 18 × 6 × 2 in |
Only logged in customers who have purchased this product may leave a review.
Product Inquiry
Related products
RJWC dual slip-on 1212
RJWC Mud Edition
Dual slip-on, Stainless steel, Billet aluminum clamp-on end caps, Repackable, Handbuilt & assembled in Sweden.
EFI Tuner recommended.
Fits:
2014 RZR 1000XP
$1,202.00 $841.40Add to cart
RJWC dual slip-on 1212
RJWC Mud Edition
Dual slip-on, Stainless steel, Billet aluminum clamp-on end caps, Repackable, Handbuilt & assembled in Sweden.
EFI Tuner recommended.
Fits:
2014 RZR 1000XP
$1,202.00 $841.40Add to cart
SYA warrior Snorkel kit 0080
Snorkel Your ATV 3″ Warrior riser snorkel kit
Warrior risers:
3″ risers, exclusive to SYA, paintable, slide & lock together, built in vent line slots, includes warrior wear pre filter tips.
Kit:
3″ all hard pipe kit, 2014 only uses 3 risers, snorkels CVT inlet, outlet & airbox,connects to factory air intake, includes vent lines & connectors.
All connections must be glued & checked before use.
$571.95Add to cart
SYA warrior Snorkel kit 0080
Snorkel Your ATV 3″ Warrior riser snorkel kit
Warrior risers:
3″ risers, exclusive to SYA, paintable, slide & lock together, built in vent line slots, includes warrior wear pre filter tips.
Kit:
3″ all hard pipe kit, 2014 only uses 3 risers, snorkels CVT inlet, outlet & airbox,connects to factory air intake, includes vent lines & connectors.
All connections must be glued & checked before use.
$571.95Add to cart
Click n Go 1.5 & 2 Mount 373987, Sportsman 570
Fits:
15-19 Sportsman 570
11-14 Sportsman 800
96-00 Sportsman 500
01-10 Sportsman 500HO
- Use with Click n Go 1.5 & Click n Go 2 Push Frames
- Includes mounting plates & hardware.
$219.99Add to cart
Click n Go 1.5 & 2 Mount 373987, Sportsman 570
Fits:
15-19 Sportsman 570
11-14 Sportsman 800
96-00 Sportsman 500
01-10 Sportsman 500HO
- Use with Click n Go 1.5 & Click n Go 2 Push Frames
- Includes mounting plates & hardware.
$219.99Add to cart
Camso Cobra, 15″x137″, 2.86″ Pitch
Recommended Use: TRAIL
- Fully clipped.
- 1.352″ Lug Height.
- Cupped lugs for superior acceleration & braking in loose snow.
- Keep a firm grip on the trail.
- Flexible lug design for superior off-trail performance.
- Softer , thinner lugs generate less noise for improved rider comfort.
PICK UP IN WINNIPEG or CALGARY ONLY
Camso Cobra, 15″x137″, 2.86″ Pitch
Recommended Use: TRAIL
- Fully clipped.
- 1.352″ Lug Height.
- Cupped lugs for superior acceleration & braking in loose snow.
- Keep a firm grip on the trail.
- Flexible lug design for superior off-trail performance.
- Softer , thinner lugs generate less noise for improved rider comfort.
PICK UP IN WINNIPEG or CALGARY ONLY
Camso Hacksaw, 15″x121″, 2.52″ Pitch, Pre-Holed
Recommended Use: TRAIL
- 144 Pre-holes for quick stud install.
- Fully clipped.
- 1″ Lug height.
- Lug height for low rolling resistance that improves fuel economy.
- Crescent lug features recessed tips & cutting edges for forward & lateral bite on hard pack.
- Hard-wearing rigid lugs with a narrow base.
- Attack angle lugs guarantee superior performance on hard groomed trails.
PICK UP IN WINNIPEG or CALGARY ONLY
Camso Hacksaw, 15″x121″, 2.52″ Pitch, Pre-Holed
Recommended Use: TRAIL
- 144 Pre-holes for quick stud install.
- Fully clipped.
- 1″ Lug height.
- Lug height for low rolling resistance that improves fuel economy.
- Crescent lug features recessed tips & cutting edges for forward & lateral bite on hard pack.
- Hard-wearing rigid lugs with a narrow base.
- Attack angle lugs guarantee superior performance on hard groomed trails.
PICK UP IN WINNIPEG or CALGARY ONLY
Dynojet PV3 PV3-19-04
Fits: Polaris
2014-19 RZR 1000XP EPS & -4
2020-21 RZR XP 1000 & -4
2020-21 RZR XP1000 Premium & -4
2015-19 RZR XP1000 EPS High Lifter & -4
2020-21 RZR XP1000 High Lifter & -4
Fueling revised, rev limit raised, speed limit raised, spark timing optimized for 91-93 octane, flash performance tunes via OEM diagnostic connector, real time data channel display, weather resistant, high contrast display.
$699.95 $636.25Add to cart
Dynojet PV3 PV3-19-04
Fits: Polaris
2014-19 RZR 1000XP EPS & -4
2020-21 RZR XP 1000 & -4
2020-21 RZR XP1000 Premium & -4
2015-19 RZR XP1000 EPS High Lifter & -4
2020-21 RZR XP1000 High Lifter & -4
Fueling revised, rev limit raised, speed limit raised, spark timing optimized for 91-93 octane, flash performance tunes via OEM diagnostic connector, real time data channel display, weather resistant, high contrast display.
$699.95 $636.25Add to cart
Click n Go 2 Mount 374474 18 Ranger 1000XP
Fits:
18 Polaris Ranger 1000XP (Will not fit High Lifter)
19 Polaris Ranger 1000XP Crew Northstar
- Use with Click n Go 2 Push Frames
- Includes mounting plates & hardware.
$229.99Add to cart
Click n Go 2 Mount 374474 18 Ranger 1000XP
Fits:
18 Polaris Ranger 1000XP (Will not fit High Lifter)
19 Polaris Ranger 1000XP Crew Northstar
- Use with Click n Go 2 Push Frames
- Includes mounting plates & hardware.
$229.99Add to cart
13-19 Polaris Pro Ride Chassis GGB Mountain Muffler
Fits:
- 13-16 Pro-Ride – Indy, Indy SP 600
- 13-16 Pro-Ride – 600 Voyageur
- 13-15 Pro-Ride – 600/800- Rush, Pro R, Switchback, Switchback Assault, RMK, RMK Assault, Assault, Pro RMK
GGB Mountain muffler is super lightweight, straight through flow design with an aggressive exhaust note. System fits securely in the stock location using stock mounts & is guaranteed to provide performance levels as good as or better then stock.
$289.95 $275.45Add to cart
13-19 Polaris Pro Ride Chassis GGB Mountain Muffler
Fits:
- 13-16 Pro-Ride – Indy, Indy SP 600
- 13-16 Pro-Ride – 600 Voyageur
- 13-15 Pro-Ride – 600/800- Rush, Pro R, Switchback, Switchback Assault, RMK, RMK Assault, Assault, Pro RMK
GGB Mountain muffler is super lightweight, straight through flow design with an aggressive exhaust note. System fits securely in the stock location using stock mounts & is guaranteed to provide performance levels as good as or better then stock.
$289.95 $275.45Add to cart
Reviews
There are no reviews yet.