GATES 21R4140 G-Force Redline Belt
$229.99 $206.99
Gates G-force Redline cvt belts have a patented Ethylene Elastomer compound that delivers a 75% greater dynamic axial stiffness, up to 50% lower speed losses & better recovery from temperatures up to +170C(+338F) without power loss. Unmatched Temperature Capability – Runs cooler, resists glazing for better recovery and reduced cracking/chunking out after running at temps exceeding +149°C (+300°F). Extended Belt Life – Belt life increased 100-300% versus aftermarket competitive belts in severe duty lab test conditions and in field testing. Higher Power Capacity – Reduced speed (rpm) loss by 50% under high loads and increased load capacity by >10% compared to other aftermarket belt.
Fits:
2011-2014 RZR 900XP
2014 RZR 1000XP
Additional information
Weight | 2 lbs |
---|---|
Dimensions | 18 × 6 × 2 in |
Only logged in customers who have purchased this product may leave a review.
Product Inquiry
Related products
Camso Cobra, 15″x137″, 2.86″ Pitch
Recommended Use: TRAIL
- Fully clipped.
- 1.352″ Lug Height.
- Cupped lugs for superior acceleration & braking in loose snow.
- Keep a firm grip on the trail.
- Flexible lug design for superior off-trail performance.
- Softer , thinner lugs generate less noise for improved rider comfort.
PICK UP IN WINNIPEG or CALGARY ONLY
Camso Cobra, 15″x137″, 2.86″ Pitch
Recommended Use: TRAIL
- Fully clipped.
- 1.352″ Lug Height.
- Cupped lugs for superior acceleration & braking in loose snow.
- Keep a firm grip on the trail.
- Flexible lug design for superior off-trail performance.
- Softer , thinner lugs generate less noise for improved rider comfort.
PICK UP IN WINNIPEG or CALGARY ONLY
RJWC dual slip-on 1213 15-19 RZR 1000XP
RJWC Mud Edition
Dual slip-on, Stainless steel, Billet aluminum clamp-on end caps, Repackable, Handbuilt & assembled in Sweden.
EFI Tuner recommended.
Fits:
2015-18 RZR 1000XP
2016-19 RZR 1000XP High Lifter
$1,202.00 $841.40Add to cart
RJWC dual slip-on 1213 15-19 RZR 1000XP
RJWC Mud Edition
Dual slip-on, Stainless steel, Billet aluminum clamp-on end caps, Repackable, Handbuilt & assembled in Sweden.
EFI Tuner recommended.
Fits:
2015-18 RZR 1000XP
2016-19 RZR 1000XP High Lifter
$1,202.00 $841.40Add to cart
13-19 Polaris Pro Ride Chassis GGB Mountain Muffler
Fits:
- 13-16 Pro-Ride – Indy, Indy SP 600
- 13-16 Pro-Ride – 600 Voyageur
- 13-15 Pro-Ride – 600/800- Rush, Pro R, Switchback, Switchback Assault, RMK, RMK Assault, Assault, Pro RMK
GGB Mountain muffler is super lightweight, straight through flow design with an aggressive exhaust note. System fits securely in the stock location using stock mounts & is guaranteed to provide performance levels as good as or better then stock.
$289.95 $275.45Add to cart
13-19 Polaris Pro Ride Chassis GGB Mountain Muffler
Fits:
- 13-16 Pro-Ride – Indy, Indy SP 600
- 13-16 Pro-Ride – 600 Voyageur
- 13-15 Pro-Ride – 600/800- Rush, Pro R, Switchback, Switchback Assault, RMK, RMK Assault, Assault, Pro RMK
GGB Mountain muffler is super lightweight, straight through flow design with an aggressive exhaust note. System fits securely in the stock location using stock mounts & is guaranteed to provide performance levels as good as or better then stock.
$289.95 $275.45Add to cart
SYA warrior Snorkel kit 0080
Snorkel Your ATV 3″ Warrior riser snorkel kit
Warrior risers:
3″ risers, exclusive to SYA, paintable, slide & lock together, built in vent line slots, includes warrior wear pre filter tips.
Kit:
3″ all hard pipe kit, 2014 only uses 3 risers, snorkels CVT inlet, outlet & airbox,connects to factory air intake, includes vent lines & connectors.
All connections must be glued & checked before use.
$571.95Add to cart
SYA warrior Snorkel kit 0080
Snorkel Your ATV 3″ Warrior riser snorkel kit
Warrior risers:
3″ risers, exclusive to SYA, paintable, slide & lock together, built in vent line slots, includes warrior wear pre filter tips.
Kit:
3″ all hard pipe kit, 2014 only uses 3 risers, snorkels CVT inlet, outlet & airbox,connects to factory air intake, includes vent lines & connectors.
All connections must be glued & checked before use.
$571.95Add to cart
Camso Hacksaw, 14″x128″, 2.52″ Pitch
Recommended Use: TRAIL
- Fully clipped.
- 1″ Lug height.
- Lug height for low rolling resistance that improves fuel economy.
- Crescent lug features recessed tips & cutting edges for forward & lateral bite on hard pack.
- Hard-wearing rigid lugs with a narrow base.
- Attack angle lugs guarantee superior performance on hard groomed trails.
PICK UP IN WINNIPEG or CALGARY ONLY
Camso Hacksaw, 14″x128″, 2.52″ Pitch
Recommended Use: TRAIL
- Fully clipped.
- 1″ Lug height.
- Lug height for low rolling resistance that improves fuel economy.
- Crescent lug features recessed tips & cutting edges for forward & lateral bite on hard pack.
- Hard-wearing rigid lugs with a narrow base.
- Attack angle lugs guarantee superior performance on hard groomed trails.
PICK UP IN WINNIPEG or CALGARY ONLY
KFI Winch Mount 101345
KFI winch mount 101345 for most 2,000lb to 4,500lb winches(see list below), 100% made in USA, powdercoated black, 3/16″ material, includes mounting hardware.
Models:
2013-2019 Ranger 900XP
2014-2019 Ranger 900XP Crew**
2017 Ranger 1000XP, Northstar Edition(HVAC)
2017-2018 Ranger 1000XP Crew, Northstar Edition(HVAC)**
2015-2016 Ranger 570 & XP Full Size(900 body style)
2015-2016 Ranger 570-6 Crew Full Size(900 style body style)**
** = Requires wire extension kit #UTV-WEK
Roller fairlead & winch not included
KFI Winch Mount 101345
KFI winch mount 101345 for most 2,000lb to 4,500lb winches(see list below), 100% made in USA, powdercoated black, 3/16″ material, includes mounting hardware.
Models:
2013-2019 Ranger 900XP
2014-2019 Ranger 900XP Crew**
2017 Ranger 1000XP, Northstar Edition(HVAC)
2017-2018 Ranger 1000XP Crew, Northstar Edition(HVAC)**
2015-2016 Ranger 570 & XP Full Size(900 body style)
2015-2016 Ranger 570-6 Crew Full Size(900 style body style)**
** = Requires wire extension kit #UTV-WEK
Roller fairlead & winch not included
High Lifter Snorkel Riser Extension Kit RRK-HL-SPT
High Lifter kit extends factory High Lifter edition snorkels only, includes BLACK High Lifter 2″ riser caps.
Fits: ONLY HIGH LIFTER MODELS
2016-23 Sportsman 850XP High Lifter
2016-23 Sportsman 1000XP High Lifter
$279.99Add to cart
High Lifter Snorkel Riser Extension Kit RRK-HL-SPT
High Lifter kit extends factory High Lifter edition snorkels only, includes BLACK High Lifter 2″ riser caps.
Fits: ONLY HIGH LIFTER MODELS
2016-23 Sportsman 850XP High Lifter
2016-23 Sportsman 1000XP High Lifter
$279.99Add to cart
UNI Air Filter NU8519ST
Open cell polyurethane foam. For best results pre-oil with air filter oil. Can be easily washed, re-oiled & re-used.
Fits: Polaris
2014-18 RZR 1000XP (All Models)
2016-21 RZR Turbo
$102.99 $92.69Add to cart
UNI Air Filter NU8519ST
Open cell polyurethane foam. For best results pre-oil with air filter oil. Can be easily washed, re-oiled & re-used.
Fits: Polaris
2014-18 RZR 1000XP (All Models)
2016-21 RZR Turbo
$102.99 $92.69Add to cart
Reviews
There are no reviews yet.