Super ATV Black Ops 25 Winch
$426.95 $405.60
Super ATV’s 2,500lb Black Ops powersports winch is designed to help get your ATV out of a bad situation. It’s built to be water resistant, fit most bumpers or winch mounts with a 3″x 4.88″ mounting pattern. Each winch comes complete with everything you need to install on your ATV.
Requires machine specific mounting plate or winch ready bumper.
Description
- 2,500lb capacity
- 7/32″ x 50ft synthetic rope, winch rope bumper & aluminum hawse fairlead
- 3″ x 4.88″(76mm x 124mm) mount holes
- Handlebar mount rocker switch
- Wireless remote
- Includes mounting hardware & wiring
- 12V DC, 1hp permanent magnet motor
- 166:1 Ratio
- Water resistant remote receiver with 50ft range
- 12.20″Length x 4.61″Width x 4.78″High
- 12ft of wiring
- 1 year warranty
Additional information
Weight | 28 lbs |
---|---|
Dimensions | 12 × 20 × 7 in |
Only logged in customers who have purchased this product may leave a review.
Product Inquiry
Related products
MOOSE Heated Clamp-On Grip Set Dual Zone
Moose dual zone clamp-on heated grips & thumb warmer by Heat Demon with ODI clamp-on grips. Fits most ATV’s & Snowmobiles with 7/8″ handlebars & a thumb throttle.
- One adhesive backed silicone thumb warmer
- Dual zone controller-select thumb and grip heat levels separately
- Five level power memory
- Grips use maximum 40 watts(20per grip) @ 14volts
- Thumb warmer use maximum 5 watts @ 14volts
** UNIVERSAL FIT **
$289.99 $260.99Add to cart
MOOSE Heated Clamp-On Grip Set Dual Zone
Moose dual zone clamp-on heated grips & thumb warmer by Heat Demon with ODI clamp-on grips. Fits most ATV’s & Snowmobiles with 7/8″ handlebars & a thumb throttle.
- One adhesive backed silicone thumb warmer
- Dual zone controller-select thumb and grip heat levels separately
- Five level power memory
- Grips use maximum 40 watts(20per grip) @ 14volts
- Thumb warmer use maximum 5 watts @ 14volts
** UNIVERSAL FIT **
$289.99 $260.99Add to cart
Dynojet PV3 PV3-25-10 Drive By Wire
Fueling revised, rev limit raised, speed limit raised, spark timing optimized for 91-93 octane, cooling fan engagement temp lowered, flash performance tunes via OEM diagnostic connector, real time data channel display, weather resistant, high contrast display.
Fitment:
2019+ Outlander with Drive By Wire Throttle ONLY
2019+ Renegade with Drive By Wire Throttle ONLY
$719.95 $654.43Add to cart
Dynojet PV3 PV3-25-10 Drive By Wire
Fueling revised, rev limit raised, speed limit raised, spark timing optimized for 91-93 octane, cooling fan engagement temp lowered, flash performance tunes via OEM diagnostic connector, real time data channel display, weather resistant, high contrast display.
Fitment:
2019+ Outlander with Drive By Wire Throttle ONLY
2019+ Renegade with Drive By Wire Throttle ONLY
$719.95 $654.43Add to cart
TWIN AIR 156061FR Replacement air filter
** Air Filter ONLY **
** MUST HAVE Twin Air 156061P Cage & Cap To Use **
$62.95 $56.66Add to cart
TWIN AIR 156061FR Replacement air filter
** Air Filter ONLY **
** MUST HAVE Twin Air 156061P Cage & Cap To Use **
$62.95 $56.66Add to cart
STM Rage 3P Billet Primary Clutch 3001035
STM Rage 3P billet aluminum primary clutch for Can-Am ATV’s.
Must have stock or long post STM G2 Tuner secondaries.
Shipped with:
PATV6 White spring
45ATVX3P adjustable weights (NOT INSTALLED)
Fits:
2006-2015 Outlander 800, All models
2016-2023 Outlander 850, All models
2012-2023 Outlander 1000, All models
2007-2015 Renegade 800, All models
2016-2022 Renegade 850, All models
2012-2023 Renegade 1000, All models
2011-2020 Commander 800, 1000 All Models
2013-2018 Maverick 1000 All Models
$1,774.95Add to cart
STM Rage 3P Billet Primary Clutch 3001035
STM Rage 3P billet aluminum primary clutch for Can-Am ATV’s.
Must have stock or long post STM G2 Tuner secondaries.
Shipped with:
PATV6 White spring
45ATVX3P adjustable weights (NOT INSTALLED)
Fits:
2006-2015 Outlander 800, All models
2016-2023 Outlander 850, All models
2012-2023 Outlander 1000, All models
2007-2015 Renegade 800, All models
2016-2022 Renegade 850, All models
2012-2023 Renegade 1000, All models
2011-2020 Commander 800, 1000 All Models
2013-2018 Maverick 1000 All Models
$1,774.95Add to cart
STM G2 Tuner Billet Secondary Clutch 3001018
STM G2 Tuner billet aluminum secondary clutch with long post or Can-Am ATV’s.
Works with Stock, CV Tech or STM primaries.
Shipped with KSS8 lime green spring & 40 degree helix.
Fitment:
2006-2015 Outlander 800, All models
2016-2023 Outlander 850, All models
2012-2023 Outlander 1000, All models
2007-2015 Renegade 800, All models
2016-2022 Renegade 850, All models
2012-2023 Renegade 1000, All models
2011-2020 Commander 800, 1000 All Models
2013-2018 Maverick 1000 All Models
$1,019.95Add to cart
STM G2 Tuner Billet Secondary Clutch 3001018
STM G2 Tuner billet aluminum secondary clutch with long post or Can-Am ATV’s.
Works with Stock, CV Tech or STM primaries.
Shipped with KSS8 lime green spring & 40 degree helix.
Fitment:
2006-2015 Outlander 800, All models
2016-2023 Outlander 850, All models
2012-2023 Outlander 1000, All models
2007-2015 Renegade 800, All models
2016-2022 Renegade 850, All models
2012-2023 Renegade 1000, All models
2011-2020 Commander 800, 1000 All Models
2013-2018 Maverick 1000 All Models
$1,019.95Add to cart
MR. RPM Head Gasket 91mm Bore 800/1000cc Can-Am
MR. RPM stock bore replacement head gasket.
Size: 91mm Bore
Fitment:
800cc & 1000cc Can-Am v-twin’s
** 2pcs required to re-do both cylinders **
$50.95Add to cart
MR. RPM Head Gasket 91mm Bore 800/1000cc Can-Am
MR. RPM stock bore replacement head gasket.
Size: 91mm Bore
Fitment:
800cc & 1000cc Can-Am v-twin’s
** 2pcs required to re-do both cylinders **
$50.95Add to cart
MR. RPM cast aluminum valve cover & water neck set
MR. RPM cast aluminium valve covers & water necks. These sets are a direct replacement for the plastic Can-Am OEM models.
Includes:
2 – Valve covers, 8 – Valve cover bolts, 2- Water necks, 2- Bleeder bolts
Fitment:
All Can-Am 500, 570, 650, 800, 850 & 1000cc v-twin engines.
** Do not over tighten bolts & test fit before installation **
** Mild grinding may be required on the inside of the covers to clear some cams **
$66.95Add to cart
MR. RPM cast aluminum valve cover & water neck set
MR. RPM cast aluminium valve covers & water necks. These sets are a direct replacement for the plastic Can-Am OEM models.
Includes:
2 – Valve covers, 8 – Valve cover bolts, 2- Water necks, 2- Bleeder bolts
Fitment:
All Can-Am 500, 570, 650, 800, 850 & 1000cc v-twin engines.
** Do not over tighten bolts & test fit before installation **
** Mild grinding may be required on the inside of the covers to clear some cams **
$66.95Add to cart
MR. RPM ARP Head Stud Kit Can-Am
ARP head stud kit by MR. RPM. Stronger option to replace OEM studs when re-doing cylinder or upgrading to a bigger bore kit.
Fits all Can-Am v-twin Atv’s & SxS’s
650cc, 800cc & 850cc cylinders use 8pcs-head studs, nuts, washers & spacers
1000cc cylinders use 8pcs-head studs, nuts & washers
** Spacers only used on shorter 650, 800 & 850 cylinders **
$345.95Add to cart
MR. RPM ARP Head Stud Kit Can-Am
ARP head stud kit by MR. RPM. Stronger option to replace OEM studs when re-doing cylinder or upgrading to a bigger bore kit.
Fits all Can-Am v-twin Atv’s & SxS’s
650cc, 800cc & 850cc cylinders use 8pcs-head studs, nuts, washers & spacers
1000cc cylinders use 8pcs-head studs, nuts & washers
** Spacers only used on shorter 650, 800 & 850 cylinders **
$345.95Add to cart
Reviews
There are no reviews yet.